What is the weight of steel in kg mm3?
steel weighs 7 900 kg/m³ (493.18089 lb/ft³) Steel weighs 7.9 gram per cubic centimeter or 7 900 kilogram per cubic meter, i.e. density of steel is equal to 7 900 kg/m³.
How much does steel weigh in kg?
A guide to the weight of common engineering metals, expressed as kgs per cubic metre
| Metal or Alloy | Kg /Cu. Mtr |
|---|---|
| Copper | 8930 |
| Steel | 7850 |
| Titanium | 4500 |
| Tungsten | 19600 |
What is steel density in kg cubic meter?
That’s why the density of steel varies from 7750 kg/m3 to 8050 kg/m3.
How do you convert kg to mm3?
The answer is: The change of 1 mm3 ( cubic millimeter ) unit of concrete measure equals = to 0.0000024 kg – kilo ( kilogram ) as the equivalent measure for the same concrete type.
What is the density of mild steel in kg m3?
7860 kg/m3
Explanation: Density is defined as the mass per unit volume. The density of mild steel is 7860 kg/m3.
How much does 1 cubic mm of steel weigh?
Steel has an approximate density of 8 g/cm3. With there being 1000 mm3 to one cm3, the density is 0.008g/mm3 for aluminum, which equates to 0.000008kg/mm3.
How do you convert steel to KG?
If we put 1 meter length for each diameter of steel bar in the formula then we will get the unit weight.
- 6 mm ø bar = 6² x 1/162 = 0.222 kg/m.
- 8 mm ø bar = 8² x 1/162 = 0.395 kg/m.
- 10mm ø bar = 10² x 1/162 = 0.617 kg/m.
- 12mm ø bar = 12² x 1/162 = 0.888 kg/m.
- 16mm ø bar = 16² x 1/162 = 1.580 kg/m.
What is the formula of steel weight?
Steel weight formula = πD*2/ 4 × L × density, where w = weight of steel, π = 3.14, D = diameter of Steel bar in mm, L= length of Steel bar =1m and density = 7850 kg/ m3.
What is the density of steel and concrete in kg/m3?
Density of Concrete are listed below In case of reinforced concrete Pre-stressed cement concrete = 2400 Kg/m3 (Kg per cubic metre) Reinforced Cement Concrete with 1% steel = 2310 to 2470 Kg/m3
What is the density of low grade steel?
The density of steel is in the range of 7.75 and 8.05 g/cm 3 (7750 and 8050 kg/m 3 or 0.280 and 0.291 lb/in 3). The theoretical density of mild steel ( low -carbon steel ) is about 7.87 g/cm 3 (0.284 lb/in 3).
How to calculate the weight of steel?
The Weight of steel is calculated by using two methods which are described below- By using the Standard formula. 1. Density of Steel In this method, the weight of steel is calculated by multiplying the density of the steel with the volume of steel. The standard density of steel is 7850 kg/m3.
What is density of strain less steel sheet?
The density of stainless steel is about 7.9 g/cm3 . The weight of stainless steel per cubic inch is 0.285 pound, per cubic foot is 490 pounds. Density also known as specific mass or specific gravity, is a measure of the mass in a specific volume.