How do you remove a Nylock nut?

Cut the nut with a hacksaw — directly across the center — so it is split on the face and not along the diameter. Press the edge of a flat head screwdriver into the cut you made and hammer the screwdriver into the cut, until the nut splits off the bolt or screw.

Can garages remove locking wheel nuts?

If you don’t have the code, garages have tools able to remove most nuts. There are locking wheel nut removal tools available from the likes of Halfords, which you hammer over the nut to cut a reverse thread, then use a wrench to unscrew it.

How do you remove a locking lug nut with a key?

Method 1 of 2: Remove your wheel locks with a wheel lock key

  1. Materials Needed.
  2. Step 1: Make sure your vehicle is in park.
  3. Step 2: Align the key with the nut.
  4. Step 3: Place your lug nut wrench on the wheel lock key.
  5. Step 4: Turn the lug nut wrench counterclockwise.
  6. Step 5: Turn the wheel lock off by hand.
  7. Materials Needed.

What to do if you lose your wheel locking nut?

Purchase a new key. This is sometimes the easiest option although it can sometimes be expensive. However if you’d like to use the original locking wheel nut set you’ll need to buy a new locking wheel nut key. Each key comes with a code so you can order a replacement from the vehicle manufacturer.

What kind of lug nuts does mcgard use?

McGard’s high quality lug nuts, wheel locks, racing lugs, spare tire locks, tailgate locks, spline drive lug nuts, and more. Complete line of marine security products, including Stern Drive Locks, Propeller Locks, Outboard Motor Locks, Trailer Wheel Locks & matching Lug Nuts.

Where can I get a mcgard product installed?

Any application questions should be confirmed by calling McGard Customer Service at 800-444-5847, Monday Friday, 8am to 5 pm Eastern time, or have your McGard products installed by a qualified local retailer/installer of McGard products. By clicking ‘OK’ you acknowledge that you have read and understand the information presented above.

How to check for a mcgard fastener match?

Always visually verify that the McGard fastener matches the fastener it is replacing. For help with this refer to the Application Verification section in our Catalog/Application Guide, or Customer Service Web page, or call McGard Customer Service at the phone number below.

What happens if you use mcgard’s proprietary information?

You agree that any unauthorized use of McGard’s proprietary information will cause McGard to suffer monetary damages and irreparable harm. By clicking ‘OK’ you acknowledge that you have read and understand the information presented above.