How do you measure for custom countertops?
Learning to measure sq footage of countertops To measure your countertops, start by measuring the length of all counter tops, base cabinets, and island. Also include the inches of back splash. Now measure the width of the counter tops and multiply the total length of the counter tops by the width in inches.
What does countertop templating mean?
Templating is the process of developing a countertop template that will allow the fabricator to know the exact measurements of your new countertop. Without a template, the fabricator would not have an accurate idea of the exact shape and measurements the countertop requires.
What is the standard size for countertops?
The standard width for kitchen countertops is 25 inches. Depending on your specific space, this number can fall within the range of 24 ½ to 25 ½ inches. In the bathroom, countertops are typically between 19 ½ to 22 ½ inches wide.
How long does it take to template a countertop?
Depending on the size of your project, a template may take anywhere between 30 minutes to 2 hours. The average time length is about an hour. We use a laser machine, so you do not have to remove any items from the counters and the time for a template has been reduced significantly due to this new system.
Do countertops need to be removed for template?
Solid Surface – support is required if overhang is over 6” on full cabinet base. If there’s templating over existing countertops, remove any backsplash if possible. Countertops and cabinets must be cleared off for measurements.
How do you measure for countertop installation?
Use your tape measure to measure the countertop length from wall to wall (in inches), not just from one edge of your current countertop to the other. Write down the length in the appropriate space on your scale drawing or piece paper whichever case may be. Measure this twice, just to make sure it’s accurate!
How do you figure linear feet for countertops?
Imagine the individual pieces lined up end-to-end and determine the length from one end to the other. In the countertop example, you need three pieces of two feet, three feet, and two feet. Thus, the total number of linear feet of countertop material that you need is 2+3+2=7 feet.
How long does it take to template countertops?
What is the standard depth of counters?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar.
What is the standard thickness of a kitchen countertop?
The industry standard thickness for kitchen, bathroom, and other countertop surfaces in natural stone is 1.25 inches. This thickness provides the strength and stability required to create an unbroken surface without the need for stabilizing it with a plywood backing.
Do I need to empty drawers for countertop installation?
Remove all top drawers that contain cutlery, dishes, and anything else you don’t want to get dirty. You should also empty out the cabinets under your sink, cooktop, or any other cutouts. These areas are going to get very dirty, and installers may need to access the counter surface from underneath.
How do you make a template for a countertop?
To create a countertop template, you can also use heavy construction paper or plastic templating strips. These can be folded or rolled up after gluing for easier transport. Be aware, however, that they may require specific glues to properly adhere to each other, such as quick-drying PVC solvent for plastic strips.
What is the measurement of a countertop?
Countertops are one of the most important components of a kitchen remodel. The average guidelines recommend countertops measure 158” x 24” deep and have at least 15” clearance above. This translates to 13-feet of countertop length and 26.3-square-feet of usable countertop space.
How do you calculate square footage of kitchen countertop?
Multiply your total length by 26, the width in inches of standard countertops, to find total countertop area in square inches. So, 44 inches times 26 inches yields 3,744 square inches. Multiply 144 inches by 4 inches to find your total backsplash area in square inches.
How are countertops measured?
Countertops are typically measured by contractors and fabricators in a unit called “linear feet.”. This unit is simply the total length in straight lines (thus the term “linear”) of a countertop of a given depth. Since casework is constructed of standardized modular units,…