How do I setup my D-Link DIR 300 wireless router?

How do I setup my D-Link DIR 300 wireless router?

How to setup WPA-PSK / WPA2-PSK for DIR-300

1. Step 1 Connect Your PC (Laptop) to the Router (Port 1,2,3,4 either one of them) using Network cable.
2. Step 2 Launch your IE (Internet explorer) and key in 192.168.
3. Step 3 Enter your Username: admin and no password (if it is default) click on OK.

How do I reset my D-Link Cloud n300 router?

How do I reset my router to factory default settings?

1. Step 1: With the router on, insert the end of a paper clip into the pinhole highlighted below.
2. Step 2: Hold the paper clip down for 10 seconds and release.
3. Step 3: The unit will reboot automatically. Once the WLAN light stops blinking, the unit has been reset.
4. Note:

What is the key in Dlink router?

Step 1: Open your web browser and enter http://dlinkrouter or http://dlinkrouter.local or http://192.168.0.1 into the address bar. Step 2: The default username is Admin and the password is blank (nothing). Click Login.

What is connection type in Dlink router?

There are 3 connections types used mostly by the Internet providers. Dynamic IP (DHCP),PPPoE, Static IP. Most used Internet type is Dynamic IP (DHCP). If you are using DSL,your internet connection could be PPPoE.

How do I setup my DLink router without a computer?

How to set up a Wi-Fi router without a computer

1. 1) Plug in your router, and wait a minute or two for it to completely power up.
2. 2) Using your smartphone/tablet, turn on your Wi-Fi and connect to your router’s network.
3. 3) You will be prompted to provide a password.
4. 4) When connected, open your device’s browser.

How do I fix my Dlink wireless router?

Q:I cannot get my router online, how do I fix this?

1. Ensure your Internet modem is connected to the WAN/Internet Port on the back of the D-Link Router. This port is typically Yellow.
2. Check the router internet status:
3. Reset your router to factory defaults.
4. Change the IP address of your Router:

How do you connect a D Link?

D-Link Wireless routers have a convenient Setup Wizard to walk you through the router configuration. To set up a D-Link router, you connect the router to your modem, connect a computer to the network and run the Setup Wizard. The process differs slightly depending on the type of network connection you use.

What is the default password for D Link?

The default username for your D-Link router is admin. The default password is blank. Enter the username & password, hit “Enter” and now you should see the control panel of your router.

What is a D Link cloud router?

D-Link Cloud Routers allows you to easily monitor and control your home network remotely via mydlink platform or mydlink app, from your PCs, smartphones and tablets. Cloud Routers also let you easily share files stored in any USB drive connected to it, and to access files from your mobile devices.

How to reset D-Link router password?

Open a web browser and enter the IP address of the router in the address bar (default is 192.168.0.1).