How do I extend a dimension line in Microstation?
In the dimension style windows, click the Geometry tab and in the Extension Lines section, set the value for the Offset to a negative value. The extension line offset will than start from the dimension line in the direction of the dimension origin.
What is an extension line when dimensioning?
Extension lines on a drawing are fine, dark, solid lines that extend outward from a point on a drawing to which a dimension refers.
What is the difference between extension and dimension lines?
The term “extension line” is often used interchangeably with “dimension line”; however, they are two distinct tools when dealing with technical drawing. Dimension lines present certain measurements of and between items in a drawing. Extension lines, on the other hand, are seen simply as extensions of these items.
How do I change dimension size in MicroStation?
Editing text in a dimension can be done the same as editing any other text in the file.
- Text Toolbar. Open the Text toolbar from the pulldown menu:
- Tools > Main > Text.
- Edit Text. Using the Edit Text tool you can select any dimension text and add additional words, or overwrite the entire dimension value.
How do you set dimension styles in MicroStation?
To do this;
- Go to Dimension Styles, select the New Style you are changing the dimensions to and click on the Advanced tab.
- Expand General > Placement (see image 1 below)
- Select the Level you wish to retain the dimensions on (if it is in brackets it takes the active settings)
- Save the Dimension Style.
What are extension lines Leader lines and dimension lines?
(a) Extension lines are used to indicate the extension of an edge or point to a location outside the part outline. (b) Dimension lines show the direction and extent of dimension. (c) Leader lines are used to direct an expression, in note form, to the intended place on the drawing.
Where should dimension lines be placed?
Dimensions should be given to finished surfaces or between important center lines (not to rough surfaces) wherever possible.
How do I change dimension style in MicroStation?
How do I associate a dimension in MicroStation?
Option 1 Use the Reassociate Dimension tool
- Select the Reassociate Dimension tool and select the dimension to reassociate.
- Alternatively : Place a fence around the design and then select the Reassociate Dimension tool and check the ‘Use Fence’ option in the tool settings to change multiple dimensions.
How to create a dimension style MicroStation wiki-MicroStation?
To open the Dimension Styles tool you should go into the menu: You should then see the Dimension Styles dialog box. Select the “New” icon, which looks like a blank piece of paper, or select “New” from within the Style menu pull-down.
Where are the extension lines on the Dimension line?
The extension lines are at right angles to the dimension line. Arbitrary (2D only) Parallel to the element being dimensioned. The extension lines are not constrained to be at right angles to the dimension line. This is useful when dimensioning elements in 2D “iso” drawings.
How does a semi automatic dimension text work?
Semi-Automatic Dimension text is automatically placed according to the Justification setting (Textcategory) if the text fits between the extension lines. If the text does not fit, you position the text in response to a prompt. Automatic
How do I set unit format in dimension?
Define the units of measurement in dimensions. Unit Format Affect the unit display format in dimension text. To open the Dimension Styles dialog box From the Elementmenu, choose Dimension Styles. Alignment The Alignment setting in the Placement category of the Dimension Styles dialog box is a frequently adjusted dimensioning setting.