What does Vintage Air cost?
Moderator. A fair price is $1000 – $1500 for install and charge plus the cost of the the parts.
How much freon goes in a Vintage Air system?
Vintage Air’s standard charge recommendation is 1.8 lbs (28 oz) of 134A refrigerant. This charge will be correct for most standard installations (dash-mounted systems), but some additional refrigerant will be required for a trunk-mounted system with a liquid line of more than 12 ft.
Where is vintage air manufactured?
San Antonio, Texas
We know you guys like to see how these products are made, and knowing they are made in this great country we call our own makes the story even more intriguing. Based in San Antonio, Texas, Vintage Air Inc. offers the most comprehensive line of high-performance aftermarket air conditioning components available.
What compressor does Vintage Air use?
The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown.
Can you put AC in an old car?
air conditioning to your older car? It’s a universal kit for air conditioning only. Vintage Air also has a variety of direct fit kits to add A/C and/or heat to your car in compact units that usually install completely out of sight behind the dash, should that suit your needs.
Do Vintage Air compressors come with oil?
No additional oil is necessary in new Vintage Air-supplied compressors. Typical problems encountered when charging a system: Noisy compressor: If a system is overcharged, both gauges will register abnormally high readings.
What refrigerant does Vintage Air use?
R134a REFRIGERANT
VINTAGE AIR SYSTEMS ARE DESIGNED TO OPERATE WITH R134a REFRIGERANT ONLY! USE OF ANY OTHER REFRIGERANTS IS A FIRE HAZARD AND COULD DAMAGE EITHER YOUR AIR CONDITIONING SYSTEM OR YOUR VEHICLE.
Where is Vintage Air manufactured?
What is the difference between a Sanden 508 and 709?
The 508 series Compressors are made at the Sanden facility in the Republic of Singapore and the 709 series Compressors are made in the USA. We recommend the 508 for most applications as they are a more rugged Compressor than the 709. The 709 is perfect for smaller engines and uses less Horsepower than the 508.
What do you need to know about vintage air?
Only Vintage Air offers so many options and upgrades for control panel and louver combinations for your vehicle. Below are a few inventive designs seen on some of our customer’s cars.
How much refrigerant does a vintage air system need?
Refrigerant Capacity for Vintage Air Systems: (For other systems, consult manufacturer’s guidelines) R134a System Charge with 1.8 lbs. (1 lb., 12 oz.) of refrigerant.
What kind of climate control does vintage air use?
The Gen IV is Vintage Air’s most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections.
Where are the vintage air air conditioners made?
And we have heard of some unfortunate misinformation coming from other “air conditioning sellers.”First, EVERY Vintage Air system and component is engineered and manufactured in-house at our plant in Texas.