How do I check my ASA throughput?

Calculating Throughput

  1. Login to the ASA via the CLI and run the ‘clear traffic’ and ‘clear interface’ commands to zero out the statistics.
  2. Wait about 5 minutes for ASA to gather statistics on traffic traversing the firewall.
  3. Run the ‘show traffic’ command.
  4. Go to the section “Aggregated Traffic on Physical Interface”

Is Cisco ASA NGFW?

Cisco’s ASA with FirePOWER Services provides an adaptive, threat-focused NGFW that has a proven market acceptance and independently verified defenses to protect networks.

Is the Cisco ASA 5505 still being sold?

This product is supported by Cisco, but is no longer being sold. ASA FAQ: How do you interpret the syslogs generated by the ASA when it builds or tears down connections? ASA FAQ: What happens after failover if dynamic routes are synchronized?

What is the throughput of a 5515-X firewall?

On the data sheets it states that the throughput for a 5515-X is 1.2Gbps, does this mean the total throughput through the firewall or does this mean 1.2Gbps in both directions at the same time. I need to purchase a firewall for a 1Gbps line.

How many SSD’s can I install in ASA 5512-X?

You can install one SSD in the ASA 5512-X, ASA 5515-X, and ASA 5525-X. You can install two SSDs in a RAID 1 configuration in the ASA 5545-X and ASA 5555-X. Note: When you install an SSD for the first time, you must reload the ASA and then reimage the installed module.

How much power does a Cisco ASA 5500-X use?

The AC power supply consumes a maximum of 471 W of input power. When the Cisco ASA 5500-X operates on AC power, it supports the ability to restore the previous power state of the system in the event that AC power is lost. DC power supply—Provides 400 watt output power with two DC voltage outputs: +12 V and +5.0 V.