Who makes Richdel sprinkler valves?
Sprinkler Service & Supply, Inc.
Sprinkler Service & Supply, Inc. These anti-siphon valves have been manufactured under various names with Irri Trol being the last name plate. They come in 3/4″ and 1″. Manual Richdel 3/4″ & 1″ (R706 & R709) converted to electric with the R 756 actuator.
What are the symptoms of a bad sprinkler valve?
Signs You Have a Problem
- The Water Won’t Shut Off. If you have this problem, it’s very likely the solenoid.
- Low or Uneven Water Pressure. The solenoid controls the water pressure.
- Water Leaks. There are many points in a sprinkler system that can leak.
- Current Testing.
- Valve Inspection.
- Parts Replacement.
What causes a sprinkler valve to stick open?
All the Sprinkler Valves are Stuck Open. This is a common problem when restarting after your sprinkler system has been winterized, or after the system has been turned off for an extended period of time. It also often occurs with brand new solenoid valves that have just been installed.
How do Irritrol valves work?
Water enters the valve from the system main line and exerts a force against the center of the valve’s diaphragm. A small orifice in the diaphragm allows the water to flow through to the upper chamber between the diaphragm and the bonnet.
How much does it cost to replace a sprinkler valve?
The cost to replace a sprinkler valve runs about $12.50 to $40 each for most models, plus labor expenses. The valve controls the release of water to the various zones in the yard.
Is Irritrol and Lawn Genie the same?
The DPR series are the same valves as the Lawn Genie model L701 & L703. The Irritrol APR model is a good choice for a residential system where a anti-siphon valve is appropriate (see below). These anti-siphon valves have a built in atmospheric backflow preventer.
What happens when a sprinkler solenoid goes bad?
A sprinkler works because the solenoid changes the water pressure inside the sprinkler chamber and lifts the plunger that opens the sprinkler valve. If your solenoid is bad, the water pressure in the sprinkler chamber will not be changed and the valve will fail to open.
How long should sprinkler valves last?
Valves will give you 10 to 15 years of service, while controllers 5 to 10 years.
How do I know if my sprinkler valves are open?
Turning it to the left lifts an internal gate that releases water incrementally as it turns. The gate lifts entirely when the handle is turned fully counterclockwise. If the handle will turn no farther counterclockwise, the valve is open.
What are the three types of main sprinkler valves?
There are three basic types of valves used in irrigation systems – gate valves, ball valves, and electric valves.
Which is the replacement valve for Irritrol 205?
The Irritrol R205-KIT is the Replacement Kit for ALL Irritrol 205 Series Non-Flow Control Valves. Kit includes diaphragm assembly, bonnet assembly, fasteners, and spring. The Irritrol 205 Series 1-inch plastic valve is the irrigation industry’s time-tested leader for dependable operation in potable and dirty water applications.
What can I do with an Irritrol pump?
Access irrigation, lighting, water features and pumps from a single wireless interface.
Which is the best irrigation valve with flow control?
The Irritrol 205 Series 1-inch plastic valve is the irrigation industry’s time-tested leader for dependable operation in potable and dirty water applications. With a proven track record of success in a wide range of environments, these debris-tolerant valves are available with flow control as an optional feature.
Why do you need an Irritrol home controller?
Reliable performers in a strong, full-range lineup of Irritrol® products. More choices. Same dependability. All to help your bottom line. Access irrigation, lighting, water features and pumps from a single wireless cloud-base interface through the same controller you have owned for years.